Vizio 210C Manual de usuario descargar pdf (Pagina 89)

5-19

Select other copy modes as required.

Place the original(s) on the glass face down and

with its bottom toward you and with its top left

aligned against the original scale on the left side.

Page 2-9

Press the lower SET key.

Enter the distance values read in step 5 for the

specified area.

- Key in the value for X1 with the digital keys and press the

upper SET key.

- Similarly, set the values for X2, Y1 and Y2.

When centring a part of an original, place the origi-

nal on the glass to specify the area.

- Set the original face up with the bottom toward you, fit its

top left corner against the top left corner of the glass, and

align it with the original scale.

Using the original scale on the left and the inner (top)

scale, read the position of the desired area, as fol-

lows:

- X1 Distance from the top left to the left edge of the specified

area.

- X2 Distance from the top left to the right edge of the speci-

fied area.

- Y1 Distance from the top left to the upper edge of the speci-

fied area.

- Y2 Distance from the top left to the lower edge of the speci-

fied area.

Press the START key.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 194 195

Sin comentarios

Vizio 210C Manual de usuario Pagina 89